Quick answer: A Lucknow RO purifier usually needs repair because of a clogged pre-filter, a worn membrane, a faulty inlet valve, a motor or pump fault, a tank float problem, or a warning light that needs a reset. Basic checks (power, inlet water, tank level and the indicator light) are safe to do first. Our visit and diagnosis charge is ₹299 plus GST. You receive a written quote before any repair starts.
Lucknow homes depend on RO water purifiers every day, and local water conditions vary from one locality to another. Sediment in the supply and power fluctuations are common reasons a unit slows down or stops. This guide explains the most frequent faults, what you can check yourself, and what a proper repair involves.
Common RO problems in Lucknow
No water or weak flow
Usually a clogged pre-filter, low inlet pressure or a faulty booster pump.
Bad taste or smell
Often an exhausted carbon or post-filter, or an old membrane.
Leaks
Loose push-fit connectors, cracked tubes or worn O-rings.
Warning light or error
A filter reminder, a full-tank signal or a sensor fault.
Simple checks before you call
- Power: confirm the plug is firmly in the socket and the switch is on.
- Inlet water: make sure the supply valve is open and water is reaching the unit.
- Tank: check the storage tank level and that the tank lid is closed.
- Indicator light: note which light is on, so you can describe the problem clearly.
Do not open the membrane housing or electrical parts yourself. These need a trained technician and can cause further damage.
When you need a technician
Call a technician if the unit still does not work after the checks above, if it leaks, if the taste has changed after a filter change, if the motor is unusually loud, or if a warning light stays on. If water is leaking, switch off the unit and the inlet supply first to limit damage.
Need an RO technician in Lucknow?
Message us with your RO brand, your locality and the problem. We will confirm the next step and the earliest available slot.
Repair costs in Lucknow
Prices depend on the fault and the parts needed. The table shows typical ranges for standard domestic units. Your written quote shows the exact price before work starts.
| Service | Typical price range |
|---|---|
| Visit and diagnosis | ₹299 plus GST |
| Filter set (pre, carbon or post, storage) | ₹799 to ₹1,499 |
| RO membrane | ₹2,000 to ₹3,500 |
| Motor or pump | ₹1,500 to ₹2,500 |
| Tank sanitisation | ₹399 to ₹999 |
Evening visits (from 8 PM) and late-night visits carry additional charges, which are shown at booking. Parts are itemised on your invoice, and a GST invoice is provided for all services.
How booking and cancellation work
We confirm your slot on the call or on WhatsApp. Arrival times depend on your locality, booking time, weather, traffic and technician availability.
- Cancel before the technician is dispatched: no charge.
- Cancel after dispatch, within 1 hour: ₹100 charge.
- Technician has already arrived: ₹299 visit charge applies.
Payment is accepted by cash, UPI or card after the service. Full details are in our Refund & Warranty Policy and Terms & Conditions.
